China Famous Pneumatic Ball Valve Manufacturer Manufacturers – 4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way) – KGSY

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Explosion Proof Actuator, Position Monitoring Switch, Pneumatic Angle seat valve, On account of superior excellent and aggressive rate , we will be the sector leader, make sure you don’t hesitate to contact us by cellular phone or email, if you're fascinated in almost any of our items.

China Famous Pneumatic Ball Valve Manufacturer Manufacturers – 4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way) – KGSY Detail:

Product Characteristics

1.Internally piloted structure.
2.Structure in sliding column mode: good tightness and sensitive reaction.
3. Double control solenoid valves have memory function.
4. Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
5. No need to add oil for lubrication.
6. Install in the side plate with the surface upward, which can be used by directly connecting with the actuators.
7. Affiliated manual devices are equipped to facilitate installation and debugging.
8. Several standard voltage grades are optional.

Technical Parameters

Specification
Model	4M210-06 4M220-06	4M210-08 4M220-08	4M310-08 4M320-08	4M310-10 4M320-10
Fluid	Air (to be filtered by 40um filter element)
Acting	lnternal pilot
Port size [Note1]	In=Out=1/8″	In=1/4″ out=1/8″	ln=Out=1/4″	ln=3/8″ out=1/4″
Orifice size (CV) [Note4]	4M210-08, 4M220-08: 17.0 mm² (CV = 1.0)		4M310-10, 4M320-10: 28.0 mm² (CV = 1.65)
Valve type	5 port 2 position
Operating pressure	0.15 ~ 0.8 MPa (21 ~ 114 psi)
Proof pressure	1.2 MPa (175 psi)
Temperature	- 20 ~ + 70 ℃
Material of body	Aluminum alloy
Lubrication [Note2]	Not required
Max. frequency [Note3]	5 cyclelsec		4 cyclelsec
Weight (g)	4M210: 220 4M220: 320		4M310: 310 4M320: 400
[Note1] PTthread, G thread and NPT thread are available. [Note2] Once lubricated air is used, continue with same medium to optimise valve lifespan. Lubricants likelSO VG32 or equivalent are recommended. [Note3] The maximum actuation frequency is in the no-load state. [Note4] Equivalent orifice S and Cv are all calculated from the flow rate data.

Coil Specification
ltem	4M210, 4M220, 4M310, 4M320
Standard Voltage	AC220	AC110V	AC24V	DC24V	DC12V
Scope of Voltage	AC: ±15%, DC: ±10%
Power Consumption	4.5VA	4.5VA	5.0VA	3.0w	3.0w
Protection Grade	lP65 (DIN40050)
Temperature Classification	B Class
Electrical entry	Terminal, Grommet
Activating time	0.05 sec and below

Ordering Code

products-size

Inner Sructure

products-size-1

Certifications

More

01 CE-VALVE POSITION MONITOR
02 ATEX-VALVE POSITION MONITOR
03 SIL3-VALVE POSITION MONITOR
04 SIL3-EX-PROOF SONELIOD VALVE

Our Factory Appearance

Our Workshop

1-01
1-02
1-03
1-04

Our Quality Control Equipment

2-01
2-02
2-03

Product detail pictures:

Related Product Guide:

Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for China Famous Pneumatic Ball Valve Manufacturer Manufacturers – 4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way) – KGSY , The product will supply to all over the world, such as: Macedonia, Croatia, Swiss, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Butterfly Valve With Actuator