China Famous Pneumatic Solenoid Valve Manufacturer Factory – 4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way) – KGSY
China Famous Pneumatic Solenoid Valve Manufacturer Factory – 4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way) – KGSY Detail:
Product Characteristics
1.Internally piloted structure.
2.Structure in sliding column mode: good tightness and sensitive reaction.
3. Double control solenoid valves have memory function.
4. Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
5. No need to add oil for lubrication.
6. Install in the side plate with the surface upward, which can be used by directly connecting with the actuators.
7. Affiliated manual devices are equipped to facilitate installation and debugging.
8. Several standard voltage grades are optional.
Technical Parameters
| Specification | ||||
|
Model |
4M210-06 |
4M210-08 |
4M310-08 |
4M310-10 |
|
Fluid |
Air (to be filtered by 40um filter element) |
|||
|
Acting |
lnternal pilot |
|||
|
Port size |
In=Out=1/8″ |
In=1/4″ |
ln=Out=1/4″ |
ln=3/8″ |
|
Orifice size (CV) |
4M210-08, 4M220-08: |
4M310-10, 4M320-10: |
||
|
Valve type |
5 port 2 position |
|||
|
Operating pressure |
0.15 ~ 0.8 MPa (21 ~ 114 psi) |
|||
|
Proof pressure |
1.2 MPa (175 psi) |
|||
|
Temperature |
- 20 ~ + 70 ℃ |
|||
|
Material of body |
Aluminum alloy |
|||
|
Lubrication [Note2] |
Not required |
|||
|
Max. frequency [Note3] |
5 cyclelsec |
4 cyclelsec |
||
|
Weight (g) |
4M210: 220 |
4M310: 310 |
||
| [Note1] PTthread, G thread and NPT thread are available. [Note2] Once lubricated air is used, continue with same medium to optimise valve lifespan. Lubricants likelSO VG32 or equivalent are recommended. [Note3] The maximum actuation frequency is in the no-load state. [Note4] Equivalent orifice S and Cv are all calculated from the flow rate data. |
||||
| Coil Specification | |||||
|
ltem |
4M210, 4M220, 4M310, 4M320 |
||||
|
Standard Voltage |
AC220 |
AC110V |
AC24V |
DC24V |
DC12V |
|
Scope of Voltage |
AC: ±15%, DC: ±10% |
||||
|
Power Consumption |
4.5VA |
4.5VA |
5.0VA |
3.0w |
3.0w |
|
Protection Grade |
lP65 (DIN40050) |
||||
|
Temperature Classification |
B Class |
||||
|
Electrical entry |
Terminal, Grommet |
||||
|
Activating time |
0.05 sec and below |
||||
Ordering Code

Inner Sructure

Certifications
Our Factory Appearance

Our Workshop




Our Quality Control Equipment



Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for China Famous Pneumatic Solenoid Valve Manufacturer Factory – 4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way) – KGSY , The product will supply to all over the world, such as: Oman, Sydney, Brazil, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.








